The SIVAplan GmbH & Co. KG is a specialist in sophisticated storage systems mainly for foodstuff logistics. For its storage and retrieval machines, SIVAplan has successfully tested a new energy chain guide system, which offers a weight advantage while making the installation much faster. Meanwhile, the “guidelok slimline P” system from the motion plastics specialist igus has proven itself in series production.
The SIVAplan GmbH & Co. KG has made its mark all over the food industry as well as in other industries as a specialist for automated storage and conveyor systems [. When companies are posed with the challenge, for example, of storing 12,000 pallets of frozen cakes or the production in an industrial pizza bakery requiring an uninterrupted refrigeration chain, they turn to the company based in Troisdorf. SIVAplan came into being over 40 years ago as a pioneer in the field of channel storage systems, but now the range of expertise includes all common types of warehousing. Dipl.-Wirt-Ing.
Storage and retrieval machines from its own development and production
SIVAplan has been collaborating with some customers for many decades, planning extensions and modernising their warehouses besides new structures – if the user so desires (and this is increasingly the case) and also as a general contractor. It features key components of a general contractor supply such as the steel racking shelf system, roof and wall of well-established suppliers. The control engineering, the handling system and also the storage and retrieval machines (SRM) are however basically sourced from our own development and manufacturing.
Energy supply under demanding conditions
In every SRM project the tasks of electrical engineering include the designing of the energy supply to the load suspension device. In addition to the electrical energy for drives these include the signal transmission, network connection and bus communication. This is a challenge because the SRMs have high dynamics are always on the move. On the one hand the hanging chain must be guided in such a way that it moves freely vertically, and on the other hand that it remains in the track in two axes even at high acceleration or under braking.
This can be ensured by the guidelok slimline guide system, whose first generation was developed by igus several years ago. It provides a secure hold for hanging energy chains. In every guidelok segment an automatically actuated rocker provides a secure location of the energy chain and reliably prevents unwanted swinging or knocking of the chain. When the chain moves in the radius through the segment, the rocker is pressed outwards and unlatched, so that the energy chain can move through freely. If the radius of the chain leaves the segment, the rocker pushes itself inward again and re-secures the energy chain.
Quiet and easy to install: guidelok slimline P
For this reason it is also not surprising that SIVAplan was the first user of the guide system in the latest generation, the guidelok slimline-P (GLSL-P). This product was unveiled by igus at the 2015 LogiMAT.
The special design features of the new guide system GLSL-P include rocker holder made of plastic and plug-in guide-rails. The advantages for the customer are obvious. On the one hand the whole system is lighter and cheaper by the use of plastic for the holder, on the other hand a drastic reduction in installation time is achieved by the plug-in GRP guide rails.
Another advantage of the plastic novelty is that vibrations and noise are better absorbed. The GRP angles are very dimensionally stable and cold-resistant. Knocks against the rails have no effect compared to the metal troughs, which would immediately show dents or other deformation. Even in cold storages in up to -35 degrees Celsius, the guide rails are tough enough to withstand vibration or shock.
First tests with rapid prototyped parts
After igus had produced the first parts with a rapid prototyping process, SIVAplan installed the new GLSL-P in a new storage and retrieval unit with a height of 24 metres. Three months later, the components were replaced by serial products, manufactured in the injection moulded process. The advantage of quick assembly came to the fore already at this stage.
Another advantage of the new system is the very stable guidance through enlarged guide rails. These now have a gliding pad of 40 millimetres, instead of the 30 millimetres of its predecessor. The modular system consisting of the plastic guide GLSL-P and pre-assembled energy chain with chainflex cables that have been specially developed for dynamic applications, have been very satisfactory for those at SIVAplan. In this way it was proven that the energy chain supplied by igus is already preassembled as a ‘readychain’, that is, ready for installation.
Laboratory tests prove the high abrasion resistance
Before the production launch, igus tested the new guidelok slimline P extensively in its own laboratory. Even after 1.5 million cycles on a vertical axis, there was no wear on the GRP material of the guide. Given these characteristics, it is not surprising that many other companies in the materials handling technology sector have decided to use the new GLSL-P.
